Types of hinges and where to use them

Choosing the appropriate hinge is an important step in the design process of many product applications, but with so many hinge types available, how can engineers ensure that they are choosing the right one? Stewart Beck, global product manager at Southco, explores the design considerations.

Generally speaking, hinges are used to join together a door, lid or panel to another panel or frame and allow movement of one relative to the other. Though it seems simple enough, there are a number of factors that must be considered when deciding which type of hinge to use in an application.

Hinges are often overlooked until the final stages of the design process. This can result in a rush to find a hinge that will offer the desired level of operation for the end use application. In some cases, a product design project can be put on hold when the chosen hinge does not function as anticipated or fails testing. To prevent this from happening, hinges should be incorporated at the beginning of the design process to prevent costly design revisions.

In order to select the right hinge for an application, engineers need to be aware of the different types of hinges available and how they can be used.

The primary factor that weighs into the hinge decision making process is the level of operation needed by the end user to access a door or panel on a piece of equipment. There are countless ways that this can be accomplished. The following are some of the most commonly used hinge types that engineers can use to meet their application needs.

Free swinging hinges

Free swinging hinges are the simplest form of hinges. A simple pin or shaft creates a pivot axis. The pin or shaft is generally integrated with one leaf, which leaves the other leaf free to rotate. This system allows the door to move freely along its path from open to close, allowing the user to easily move the door to access the inner enclosure. 

With free swinging hinges, there are no additional features that help users close the door or keep the enclosure securely shut. Kitchen cabinets typically use these types of hinges, as the simplicity and cost effectiveness of the hinge makes it ideal for use in a household environment. Free swinging hinges can be manufactured from a variety of materials, including stainless steel and aluminium.

The simplest function of a free-swinging hinge is to mount the hinge pivot externally, on the outside of a door or panel. This prevents the door from conflicting with the frame when opening or closing. Mounting the hinge externally helps to maximize the available space inside the enclosure as well.

Concealed hinges

Aesthetics can play a role in the type of hinge selected for an application. For example, if the hinge must be hidden to improve the look of the outer cabinet door, concealed hinges are a great option. Concealed hinges can create a smooth outer panel by hiding the hardware inside of the enclosure.

Security can also be improved through the use of concealed hinges. Unauthorized access becomes more challenging if the hinge is not a visible attack point. Criminals will be less able to tamper with the hinge if they cannot see it. As a result, potential thieves will need to look elsewhere for weak points of the enclosure to gain entry, which can help protect valuable items stored inside.

However, concealed hinges often take up valuable space inside of the enclosure. This can be an issue in some applications. For example, in electronic enclosures, the amount of space is limited due to the sheer number of components located inside. Concealed hinges may not work in this case. If the space inside of the enclosure is not an issue, concealed hinges are a great option for engineers wanting to hide the hardware.

Removable hinges

Removable hinges are another option that engineers can utilise in their end applications. Many free-swinging hinges have the ability to separate the hinge leaves, which allows users to completely remove the door or lid. Engineers can also choose a hinge that incorporates a spring-loaded mechanism which facilitates the removal of hinge pins, while the hinge components remain attached to the door.

One of the easiest ways to accomplish this is through the use of a lift-off hinge, which allows the door and hinge pin to be removed in a single motion. There are multiple applications where lift-off hinges may be utilised. If a user needs to access the interior of an enclosure, especially in tight space, removable hinges are ideal. Another example is when a product arrives to the user unassembled; removable hinges can help ensure that the user is able to assemble the product on their own.

Detent hinges

Detent hinges are designed to hold connected objects in place and are permanently attached to a door or frame. The user can open the door and have it remain in place at a predetermined angle without the use of secondary mechanical supports, such as gas struts. Certain detent hinges can be preset by the manufacturer during the design process to open doors at predetermined angles.

Detent hinges function by using a metal or an elastomer spring component that exerts force inside the hinge, providing the detent. The detent mechanism is housed and hidden inside the hinge. Detent hinges can provide hands-free access to users with a variety of positioning torques for different applications.

Torque hinges

Torque hinges are also known as friction hinges. This type of hinge allows users to hold a door or lid at any angle and have it stay in place. These differ from detent hinges, where the position of the door or lid is determined by the manufacturer. Torque hinges allow engineers to customise the forces and therefore the feel of a panel, with the aim of making the door opening/closing intuitive for the end-user.

A torque hinge resists the pivoting motion, which can be useful in situations where the goal is to hold the panel in position for safety or aesthetic reasons. Torque hinges use a series of spring components to add friction to the hinge’s shaft. This allows the hinge to closely control the friction in each rotational direction of the hinge.

One simple way torque hinges can improve the end user experience is by incorporating clutch elements into the hinge, which release the friction in the opening direction and make it much easier to lift, while still maintaining the friction that resists unwanted downward movement. As a result, end users will be able to easily open the lid and ensure that it stays open safely, without the use of any additional hardware. Laptop screens for instance, use torque hinges to allow users to keep the screen open and at their desired viewing angle.

Counterbalance hinges

There are some situations where users may struggle to safely open a lid or panel due to its weight or size. Gas struts may be used in this case, but there are applications where they take up too much space or cannot hold the weight of the panel. In these applications, counterbalance hinges could be more effective option. Counterbalance hinges utilise spring energy to help the user to open the lid.

Compression or torsion springs can be utilised depending on the available space and hinge design. The spring will apply force to help the user properly lift the lid. As a result, large, heavy lids that weigh hundreds of pounds can be easily and safety opened and closed by the end user.

Additional design considerations

There are other factors that engineers must to take into account when choosing the appropriate hinge for their application. Material choice, such as stainless steel or plastic, can affect the performance and cost of the hinge depending on where it is used. The material choice will depend on the strength required to safely open the door and the environment the hinge will operate in. The type of door or panel and what type of latch is used will also be a factor. Engineers will need to carefully consider the requirements of the application to choose the right hinge material and size.

Depending on the application, off-the-shelf hinge solutions may not fit the needs of the end user. Engineers can develop customised hinges that fit their application needs and create an experience that better serves the end user. Engineers can implement useful features that end users will appreciate when the appropriate hinge is designed into the product early in the design process.

Southco

Wainwright Road
Warndon
Worcester
WR4 9FA
UNITED KINGDOM

01905 346722

info@southco.com

www.southco.com

More products
1 day ago
NSK bearings reduce concrete floor manufacturing machine failures to zero
Regular bearing failures in a concrete floor manufacturing machine were leading to extensive downtime, costly lost production, and high maintenance costs. To rectify the problem, the customer turned to the expertise of NSK for a redesigned wheel hub and stub axle assembly.
4 days ago
Servodrives help protect chair castors and cut packaging costs
Drives and motors specialist Yaskawa has played a key role in the development of an automated system specifically designed to fit protective plastic caps onto chair castors, using its Sigma-7 series servo-drives and a SLIO-series controller.
6 days ago
SKF streamlines bearing analysis for Ansys users
With the new SKF Bearing App for Ansys Mechanical, design engineers have instant access to accurate stiffness data on more than 10,000 bearing designations. The app is available in the Ansys Store free of charge.
6 days ago
Omron awarded platinum rating from EcoVadis for sustainability
Omron has been awarded the Platinum rating following a sustainability assessment by EcoVadis. A score earning a Platinum rating, which is the highest distinction, puts the company within the top 1% of all the businesses assessed for sustainability performance.
1 week ago
ABB Value Provider wins order for rolling mill DC drive solution
DC drive specialist Iconsys is set to deliver a bespoke drive upgrade solution comprising two 12-pulse drive suites from ABB for a UK steel mill’s payoff and tension reels, used to feed and recoil steel strip through a production line.
1 week ago
What are the design considerations when specifying lead screws?
The first in the new ‘Design • Engineer • Build’ series of video podcasts focuses on lead screws – components that are at the heart of countless engineering systems. We talk to Phil Jones at Abssac about the enduring popularity of these essential design products, and the design considerations in their specification.
1 week ago
Harting honoured with the ‘Best of Industry Award’
The industry media of the Vogel Communications Group presented their ‘Best of Industry Awards’ shortly before the turn of the year. The Harting Technology Group emerged as the winner in the ‘Electrical Equipment’ category with its Han-Modular Domino modules.
1 week ago
Quick ROI and 60% decrease in maintenance travel with remote access
Brazilian surface treatment systems manufacturer Erzinger was keen to limit service trips as much as possible to serve customers faster. By implementing IXON Cloud, it can now support its customers remotely, and work in an intuitive and secure way. It can even set up multiple simultaneous connections to work together on the same project. The result is cost reduction, quick ROI and happier customers.
2 weeks ago
Nord high up in the sustainability ranking
Nord Drivesystems was assessed by the rating agency EcoVadis and awarded the silver sustainability certificate in 2022. In the overall ranking, the North German company is in the top six percent of manufacturers in the industry assessed by EcoVadis.
2 weeks ago
Mitsubishi Electric helps door manufacturer triple its throughput
Renowned door manufacturer Profile Developments has seen a threefold increase in its productivity, thanks to its latest collaboration with Mitsubishi Electric, with a solution based on multiple FR-E series inverter or variable speed drives (VSDs) and other system-matched components, such as a GOT 2000 series HMI and MELSEC iQ-R PLC.

Login / Sign up