Understanding ingress protection in electrical enclosures

One of the most critical factors in deciding which electrical enclosure or junction box should be used to protect your electrical systems and their connections is its IP rating. No matter where the housing will be located, you need to be sure that it will be able to withstand any hostilities its environment may throw at it. But how many people actually know how these IP ratings are achieved and, most importantly, the ways in which they can be compromised during installation. Chris Lloyd, General Manager for Spelsberg UK, explains how different IP ratings can be reached and how to maximise your enclosure's integrity.

As anyone who works with electrical or electronic equipment knows, IP ratings relate to the degree of protection that a housing offers against ingress from foreign bodies and moisture. EN 60529 outlines the universal rating system which utilises the letters IP (Ingress Protection) followed by two digits: the first to indicate the degree of protection against foreign bodies and the second to indicate protection from moisture (a third digit may be added to indicate protection from mechanical impact damage but this is rarely used). As the numbers get higher so too does the level of protection; IP68 is the highest, offering total protection from fine dust and from complete, continuous submersion in water.

While the rating system for an enclosure's effectiveness is simple, the methods used by manufacturers to deliver such protection are the product of many years of research and development. Two enclosures which offer the same level of overall protection may achieve it in very different ways, which can have a big impact on the purchase cost, installation time and longevity of the product. Understanding the different techniques is the first step in making the right choice for any given application during specification.

The most obvious way in which external debris or moisture may enter the enclosure is through gaps between the body of the product and its lid. No matter how precisely an enclosure is manufactured, microscopic particles of dust and water droplets will be able to fit through the gaps which are left if a seal is not also employed. This is why high-quality enclosures will often feature sealing arrangements to ensure absolute protection around the lid.

Separate gasket seals always have the habit of wandering out of position or folding during installation which can be both infuriating and dangerous, especially when working on site. To guarantee that its seals will not fail, Spelsberg has invested in developing an injection moulding technique which means the seal is formed as a single construction which is an integrated part of the enclosure.

Enclosures which are designed to offer higher IP ratings will typically require tooling to fix the lid in place. While this is often as simple as a few small screws, it plays an important part in making sure that the seals are securely pressed flush against the surface, and that small impacts will not affect this. Medium and low IP ratings are more often supported with a "˜push-click' mechanism which is quicker to use but allows for a small degree of movement once closed. Hinges and other accessories may also affect the enclosure's IP levels; while they may offer improved access for the user, they also generate more gaps through which foreign bodies or moisture could infiltrate.

Silicone gel

A popular technique, which is used to deliver an IP rating of IP68, is to fill the enclosure with a silicone gel after the connections have been made. This completely isolates the electrics from the external atmosphere, meaning that any moisture or dust which does permeate through the enclosure's protection will still not come into contact with them. Gel-filled enclosures offer distinct advantages and disadvantages which lend them to very specific applications.

Using gel to protect the contents of an enclosure means that an IP68 rating is easier to achieve and does not require such expensive tooling. This means that the units are often supplied more cheaply, despite being delivered with the silicone mixing packs. Because of the guaranteed internal protection there is also little need for time-consuming screw-down lids. This can speed up the installation process and ultimately improve the profitability of jobs which involve numerous installations.

However, it is impossible to access the connections without breaking the gel apart once it has been set. This means that, in applications where regular updates or routine maintenance may be required, they can prove time consuming and expensive (as a new gel pack will be required each time). For applications where the enclosure will be installed once and then left in an environment that requires IP68 protection - such as underground connections for external lighting systems - gel filled enclosures are a good option. For most other applications which require high IP, it is generally better to pay a slightly increased premium for a product which generates its protection through innovative design and high-quality manufacturing.

A final consideration when specifying the enclosure is the number of entries that may be required and ways in which the entry option is presented. As standard, many enclosures are available with knock-out points around the walls of the unit which can be removed using the correct tools. This method is preferable to pre-cut holes, as it means that the enclosure is supplied with its IP rating intact. However there is a fine balance between the knock-outs being very hard to remove and being too easy, either vastly increasing installation time or risking accidental removal once in application.

Some companies, like Spelsberg, offer a customisation service which allows the customer to specify the number, size and location of each entry point. This means that the product is delivered ready to be installed with no risk of entry points being opened which are unnecessary. Spelsberg offers this service on nearly all of its 14,000 standard products. All work is carried out on its in-house CNC machines, meaning that no minimum order quantities are required. Any one of its expert sales team can help in designing the enclosure to the exact requirements of your application.

Cable gland

Specifying the correct enclosure is only the first step in delivering a housing product which meets the correct requirements. As soon as a cable enters the unit its IP rating is compromised, which means that specifying the correct entry sealing product is equally important. There are many guides to specifying the correct cable gland for an application available online (and a video on the topic produced by Spelsberg), but suffice to say that for high IP ratings the traditional dome-topped cable gland offers absolute security while "˜push-fit' membranes offer a speedy option for applications which are less exposed to the elements.

Finally, it is important to check that the installation process does not risk compromising the effectiveness of the enclosure's designed-in protection. There are many examples which can be quoted where a customer has specified a high rating enclosure with dome-topped cable glands and after a few months found that there has been water or dust ingress. This is normally caused by a simple oversight in the process which can be easily prevented.

Classic mistakes to avoid include:

  • Positioning the entry points on the top side of an enclosure located outside, where puddles of water are likely to collect around the seal and be drawn in by heat expansion and contraction
  • Fixing caution notes and signs to the lid of an enclosure with screws that perforate the enclosure
  • Not fitting breather valves in high humidity environments with a large temperature differential
  • Compromising the enclosure by fixing it to a wall or bulkhead through the back panel - some enclosures supply grommets to cover internal screw heads and others provide bracketing or din rail mounting systems that remain external to the internal box space
  • Using enclosures with loose gaskets that fall out of place as the lid is closed or tightened up

Mistakes like this are easy to avoid, and any good supplier should be able to offer advice on how best to reap the benefits of any enclosure's IP potential.

Manufacturers like Spelsberg have invested heavily over the years to develop manufacturing techniques and innovative product designs which offer the maximum protection from moisture and foreign particles. Some are more reliable than others and some offer easier or quicker installation, so it's always worth asking how an enclosure's IP rating is achieved; most suppliers should be able to show you the different options available and help you in the specification process.

For further information about electrical enclosures, housings and junction boxes from Spelsberg, please visit their website at www.spelsberg.co.uk/.

Spelsberg Els UK Ltd

Unit 1B Queensway Business Park
Hadley Park West
TELFORD
TF1 6AL
UNITED KINGDOM

+44 (0)1952 605849

sales@spelsberg.co.uk

www.spelsberg.co.uk

More from Spelsberg Els UK Ltd

On the charge!

Posted 6 days ago

Switching into LV switchgear enclosure mode

Posted 1 week ago

Fast prototypes for industrial enclosures

Posted 2 weeks ago

The path to faster development of industrial enclosures

Posted 1 month ago

New configurator has it figured out

Posted 2 months ago

Protection reaches a critical junction

Posted 3 months ago

EVs – a highly charged topic

Posted 4 months ago

Industrial enclosures – more than just the box

Posted 4 months ago

Developments in charging technology

Posted 6 months ago

Mini size junction boxes now available

Posted 6 months ago

New fire-resistant enclosure maintains electrical system safety

Posted 8 months ago

Enclosure customisation is key for fire safety control unit

Posted 8 months ago

Enclosures for outdoor electrical installations

Posted 11 months ago

Hand sanitiser dispenser manufacturer demands rugged enclosures

Posted 1 year ago

Customised enclosures for extreme and challenging environments

Posted 1 year ago

Spelsberg UK working hard to maintain UK stocks

Posted 1 year ago

Take a virtual tour of Spelsberg's electrical enclosures

Posted 1 year ago

Spelsberg GRP enclosure installed in UK's deepest mine

Posted 1 year ago

Movie of the month

Posted 1 year ago

Quick delivery on printing and labelling of enclosures

Posted 1 year ago

How to specify enclosures for environmental management systems

Posted 1 year ago

Spelsberg helps UK machine builders to beat Brexit uncertainty

Posted 1 year ago

Fast turnaround on customised enclosures

Posted 1 year ago

GEOS enclosures are suitably rugged for coastal applications

Posted 1 year ago

Extensive stocks of Spelsberg enclosures held in the UK

Posted 2 years ago

Overnight customised enclosures thanks to in-house machining

Posted 2 years ago

Video shows the extreme tests endured by Spelsberg enclosures

Posted 2 years ago

Praise for Spelsberg UK's Pro-Active technical telesales service

Posted 2 years ago

Spelsberg customised enclosures feature in educational rig

Posted 2 years ago

Movie of the month

Posted 2 years ago

Spelsberg enclosures speed fast-food kitchen fit-outs

Posted 2 years ago

GEOS enclosures provide protection in aggressive environments

Posted 2 years ago

Enclosures ensures lift passengers can make emergency calls

Posted 2 years ago

Drives and Controls celebrate 18 years of Spelsberg distribution

Posted 3 years ago

Spelsberg and CED offer top-class junction boxes to wholesalers

Posted 3 years ago

Spelsberg UK turns 20: learning from the past, moving forward

Posted 3 years ago

Combating condensation in enclosure installations

Posted 3 years ago

Spelsberg aids efficiency in offsite heat exchange builds

Posted 3 years ago

Where to position electrical enclosures

Posted 3 years ago

John Clarke is new Spelsberg Area Sales Manager for West region

Posted 3 years ago

Free expert advice from enclosureanswers.com

Posted 3 years ago

Distribution board helps keep divers' pressure stable

Posted 3 years ago

Next-day custom enclosure samples keep projects on schedule

Posted 3 years ago

Spelsberg custom enclosures in dairy farming applications

Posted 4 years ago

Tough enclosures bring safety and endurance to road tankers

Posted 4 years ago

Spelsberg shows its true colours for superior customer service

Posted 4 years ago

Spelsberg appoints Chris Smith as South West Area Sales Manager

Posted 4 years ago

Ultraviolet considerations when specifying an enclosure

Posted 4 years ago

Spelsberg fit and forget thermostat keeps frost and snow at bay

Posted 4 years ago

Bespoke cabling systems company grows with Spelsberg enclosures

Posted 4 years ago

Spelsberg aluminium enclosures expected to prove a hit

Posted 4 years ago

Spelsberg offers farmers world-class electrical enclosures

Posted 4 years ago

WAGO uses Spelsberg enclosures for new pre-mounted products

Posted 4 years ago

Spelsberg laboratory approved for in-house UL certification

Posted 4 years ago

Spelsberg offers upgrade to classic Abox design

Posted 4 years ago

Enclosures speed rewiring of automated manufacturing systems

Posted 4 years ago

GRP: the best of both worlds for trackside enclosures?

Posted 5 years ago

Commercial salad growers box clever with Spelsberg

Posted 5 years ago

Modular distribution enclosures improve "˜Smart Building'

Posted 5 years ago

Managing heat in electrical enclosures

Posted 5 years ago

Spelsberg slashes lead times on custom orders

Posted 5 years ago

Customised standard enclosures are quick and cost-effective

Posted 5 years ago

Spelsberg UK plans for growth in 2016 to support market demands

Posted 5 years ago

Spelsberg Pro-Active simplifies ordering for reduced lead times

Posted 5 years ago

Stealth enclosures for covert operations

Posted 5 years ago

Quickly find the right enclosure with new Spelsberg UK website

Posted 5 years ago

High-quality GRP heavy duty enclosures from Spelsberg

Posted 5 years ago

Spelsberg launches steel enclosure range

Posted 5 years ago

Ready-made enclosures for water treatment industry

Posted 5 years ago

1000+ bespoke enclosures moulded and assembled in 4 weeks

Posted 5 years ago

A-Z of electrical enclosures

Posted 6 years ago

Integrated ventilation with Spelsberg's AK Air enclosures

Posted 6 years ago

Trace heating thermostats keep water treatment plants running

Posted 6 years ago

Innovative electrical enclosures for new aircraft carriers

Posted 6 years ago

How to select the best material for an electrical enclosure

Posted 6 years ago

The questions to ask when specifying an electrical enclosure

Posted 6 years ago

Spelsberg expands current TK enclosure range

Posted 6 years ago

Metal vs. plastic: specification of large outdoor enclosures

Posted 6 years ago

Rapid-Box: bespoke fire-resistant junction box

Posted 6 years ago

Specialised coatings improve enclosure performance

Posted 6 years ago

Spelsberg claims largest selection of non-metallic enclosures

Posted 7 years ago

Spelsberg WKE enclosures used for emergency systems

Posted 7 years ago

Bespoke moulding service speeds up repeat orders from Spelsberg

Posted 7 years ago

Customised enclosures help prevent freezing pipes

Posted 7 years ago

Service over supply from Spelsberg

Posted 7 years ago

Spelsberg appoints David Mills as Area Sales Manager for NW

Posted 7 years ago

Chris Lloyd confirmed as Spelsberg UK MD

Posted 7 years ago

Abox Magic GT gel provides IP68 ratings to 15 metres

Posted 7 years ago

How to select correct IP ratings for electrical enclosures

Posted 7 years ago

An introduction to electrical enclosure specification

Posted 7 years ago

Customised enclosures reduce costs and improve quality

Posted 7 years ago

Flexibility and reliability for airflow control unit enclosures

Posted 8 years ago

Spelsberg reduces lead times with new UK headquarters

Posted 8 years ago

Composite junction boxes for aircraft carrier lighting systems

Posted 8 years ago

Composite junction boxes used on RN aircraft carriers

Posted 8 years ago

Spelsberg will improve lead times on customised products

Posted 8 years ago

Non-metallic enclosures: the future for trackside installation

Posted 8 years ago

Revamped GTi range speeds up switchgear installation

Posted 8 years ago

Spelsberg UK sales team is strengthened with new appointments

Posted 8 years ago

Spelsberg launches its 'Space for you' campaign

Posted 8 years ago

New B-Box from Spelsberg offers quick, waterproof installation

Posted 8 years ago

Which is the best material for your application's enclosure?

Posted 9 years ago

Waterproof gel-filled enclosures are reusable

Posted 13 years ago

Non-metallic enclosures cope with harsh outdoor environments

Posted 13 years ago

Rugged Norma PC and ABS enclosures are sealed to IP65

Posted 13 years ago

IP66 enclosures selected for water shut-off valve controls

Posted 13 years ago

Custom junction box moulded in high-grade black plastic

Posted 13 years ago

Spelsberg products available through Farnell

Posted 14 years ago

Modular enclosures maintain IP65 protection

Posted 14 years ago

Rugged enclosures are suitable for fire engine applications

Posted 14 years ago

TK enclosures are tough enough for classrooms

Posted 14 years ago

More technical articles