Unifying the process control network

Single fieldbus gateway reduces costs and can help expand control capability

For wide-ranging liquid and gas control applications, commonality of hardware including valves and sensors guarantees performance through successful component integration. Connecting this hardware to the main PLC through a single fieldbus gateway reduces costs and can also be an opportunity to expand control capability.

Greg Wainhouse, field segment manager for water at Bürkert, explains for MachineBuilding.net readers how to optimise process control integration.

“The trend towards commonality of hardware within an automated control system increasingly includes process applications, from food & beverage markets through to pharmaceutical production. Previously, engineers may have specified a mix of ‘best of breed’ components or procurement teams might have selected individual items for best cost.

"The risk, however, is the challenge in integration, including the time it takes in commissioning and the accumulated cost. In some cases, attempts at integration may not succeed at all, with no single vendor able to resolve the issue."

Open digital communications compatibility

“For engineers designing liquid or gas process applications, the advantage of a supplier that provides a full range of valves, sensors, mass flow controllers/meters and displays that can communicate via Ethernet, means assured integration between the components and the controller. Removing the potential for system errors and speeding up commissioning, a single supplier also reduces procurement costs.

“Further to supplying a full range of valves, sensors and associated process control hardware, Bürkert’s ME43 fieldbus gateway is flexible for virtually all liquid and gas applications and the preferred communications protocol, featuring wide-ranging compatibility with Ethernet-enabled PLCs. This includes PLCs that communicate via PROFINET, EtherNet/IP, Modbus/TCP, PROFIBUS DPV1, EtherCAT and CC-Link.

“Even if individual devices have Ethernet connectivity, linking each of them directly to the PLC incurs an additional licence cost for each node. The benefit of the ME43 is that licence costs are significantly reduced as hardware is channelled through the fieldbus gateway and then to the PLC, requiring just a single licence.

"Bürkert hardware communicates via the open source CANopen protocol, ensuring compatibility that also extends to third-party CANopen-based devices. Whether developing a new system or extending existing infrastructure, up to 128 inputs and outputs can be assigned to the ME43."

Analogue device integration

“Third party devices, such as solenoid valves or sensors, that are not Ethernet-enabled can also be integrated to a Bürkert system via the ME43, thanks to a range of I/O cards. These enable the fieldbus gateway to receive analogue input signals, such as a standard 4-20 mA signal or 0-10 V through to pulse outputs common to previous generation flow meters, and then convert them to digital signals.

"While Bürkert provides a wide variety of process control hardware, this communications flexibility means operators are not locked in if they want to integrate a specific third-party manufacturer’s device.

“This capability enables straightforward extension of existing systems, while new projects can be developed using various currently available devices, such as paddlewheels, that often only provide pulse outputs. This also satisfies the requirements of engineers who prefer analogue or pulse devices for fault diagnosis, using a meter rather than a laptop connected to the PLC."

Improved installation and commissioning

“The ME43’s digital output relies on just a single cable, significantly reducing the cost of wiring and the time required for installation, which also makes maintenance easier. Similarly, the speed of commissioning is far faster and Bürkert’s Communicator is a single piece of free software that can configure and manage all PLC-connected devices via a laptop, which also allows remote connectivity.

“An advantage for commissioning and maintenance via CANopen includes Bürkert’s expansion of the protocol to include additional status indicators. Using industry standard signal outputs, potential errors, such as valve opening and closing times, can be presented using recognised alerts displayed via Communicator as well the majority of devices."

Extended control

"The ME43 also includes control capability of its own and can manage segregated parts of a plant operation, like dosing on a skid as well as graphical programming for the automation of sub-systems. Graphical programmes can be created within the gateway to manage operations such as water level monitoring involving a pump and PID loops controlling upper and lower setpoints.

"In this way, the ME43 can also be used for distributed control to peripheral areas of a plant and if required, two or more ME43 units can be combined in a daisy chain and fed through to the central PLC. This also frees up processing capacity on the central PLC and segregating control adds a layer of security for selected operations should the central processor fail.

"Commonality of hardware under a single device that can manage communications ensures integration for lower project costs as well as faster commissioning. With extra monitoring and control potential, the ME43 combined with Bürkert’s full range of valves, sensors and process control hardware is more than just a field bus gateway: it provides system performance and long-term reliability."

Bürkert’s ME43 fieldbus gateway is flexible for virtually all liquid and gas applications.
Bürkert’s ME43 fieldbus gateway is flexible for virtually all liquid and gas applications.

Burkert Fluid Control Systems

Fluid Control Centre
1 Bridge End

+44 (0)1285 648720



More news
38 minutes ago
World’s first e-chain made of 100% recycled material
Conserving resources and extending the product life cycle are the objectives of the new Igus cradle-chain E2.1.CG, which the company says saves 28% CO2 versus current e-chain production.
2 hours ago
Siemens Congleton factory accelerates towards net zero goal
Siemens’ Congleton factory is on track to achieve carbon neutrality this year – eight years ahead of its original target.
5 hours ago
Inductive sensors prove a ‘jack of all trades’ in bridge construction
When a specialist assembler of prefabricated bridges needed a rugged sensor for position sensing on its hydraulic cylinders, it turned to Contrinex.
8 hours ago
Digital tools to support engineering design
Nowadays in engineering, digital tools are an essential part of a design engineer’s daily life and any tools that are available freely are naturally an added bonus.
1 day ago
Nabtesco delivers solutions for every drive application
To continue meeting increasing demand, Nabtesco is substantially expanding its production capacities with the construction of a new factory in Hamamatsu, 250 km southwest of the its headquarters in Tokyo – which will double the annual production capacity to two million precision gearboxes by 2026.
2 days ago
Festo showing ‘Progress in Motion’ at PPMA 2022
The Festo stand at PPMA 2022 will focus on key applications for the process and packaging sector. These include innovative process valve controls, servo-controlled flow wrapping and a new solution for controlling web tension with dancing rollers.
2 days ago
IFM Electronic makes IIoT easy at PPMA 2022
At this year’s PPMA Show, IFM Electronic is focusing on its moneo IIoT platform. This has been developed specifically to provide a convenient solution to the challenge of converting the huge amount of data produced by modern plant and machines into useful information that can be used to reduce downtime, optimise efficiency and cut costs.
2 days ago
Bürkert extends capabilities with Fine Controls partnership
The key distribution partner agreement between Bürkert and Fine Controls brings OEMs or end users in process control a distributor who can supply all the parts necessary to build a complete process system, as well as offering design and specification support.
6 days ago
Individual service for signal integrity
The demands on connection technology performance are constantly increasing. By providing customised support, Phoenix Contact helps customers select connection components to ensure the highest possible signal integrity.
6 days ago
Aveva MES rises in the leader ranks of the latest Gartner report
Aveva’s Manufacturing Execution Systems (MES) offering, which is deployed in the UK & Ireland by AVEVA Select partners SolutionsPT, has been recognised as a global leader in industrial software in the latest 2022 Gartner Magic Quadrant for Manufacturing Execution Systems.

Login / Sign up