What does the future hold for motion control?

Industrial control is a highly developed field that advances year on year as the underlying technology advances. But will it and all its specialist sub-sets continue to thrive? Gerard Bush, a motion specialist with INMOCO, offers his opinion.

All technologies develop over time, with most eventually reaching an upper limit where they are as advanced as they can be. This is clearly evident in older technologies where the peak has been reached, an example being steam trains which over about 100 years developed from Stephenson's Rocket to the Flying Scotsman.

In other cases it is less clear. Cars, for instance, continue to develop at a rapid pace. There is no denying that a 10-year-old car is not as sophisticated as one fresh off the production line, but it can be argued that the developments are actually advances in constituent technologies rather than fundamental car design - for example, is an engine management system an advance in automotive engineering or electronics applied to automotive applications? Is satnav automotive engineering or digital technology?

Cars are currently offering us another important insight to the advancement of technologies - the role of disruptive change, with the manufacturers responding to socio-political pressures and developing electric propulsion. A Cinderella technology for at least a couple of decades, electric and hybrid cars are now available from most automotive majors and are moving into the mainstream markets.

So is this development pattern being reflected in the world of industrial control? There have certainly been advances since the 1960s days of hand-assembled relay boards and the pneumatic (non-sparking) control of early North Sea oil rigs. Further, it is not surprising that specialist forms of control, such as SCADA, motion control and dual redundancy safety have developed.

Development drivers

There are two main things that drive the advancement of technology. The first is the makers of the technology pushing the performance envelope of their products, to improve performance and give them an edge over their competitors. The second is user demand, people wanting to do more with a given technology and asking the manufacturers to help.

Then we have to allow for the occasional step change caused by a disruptive event, and control technologists are experiencing one right now - Industry 4.0.

The term Industry 4.0 was coined to describe the merger of two separate things in the worlds of manufacturing and production: the field-level device control of automation and the transfer of the resultant data to higher level control systems for both production and enterprise management. First used in 2011 - at that year's Hanover Fair - it embraces cyber-physical systems, the Internet of Things, cloud computing, cognitive computing and "˜smart factories'.

In fact it is fair to say that Industry 4.0 is a group of related technologies that are brought together to improve productivity by bringing as much information as possible to the control of machines and processes.

Motion control is now offering an illustration of how this evolving. Over the last few years the developers of motion technologies have improved the data communications and processing capacity of their control units. Naturally, once the controllers had more capacity, users started to set up systems with more information flowing through them. The result is that the host machines have become more responsive to their operating environment and production requirements and thus more productive.

An example of this is that a production machine may be in communication with a system that is measuring user demand in real time (or near-real time) and thus able to automatically react to market changes. Alternatively a machine may be equipped for continuous self-diagnostics, allowing the motion controller to slow down operations and summon maintenance help if a warming bearing is suggesting a possible pending breakdown.

Mobile robots

Another example is in the growing popularity of AGVs (automated guided vehicles) in warehouses and factories. These are effectively mobile robots that can travel from workstation to workstation to deliver workpieces, or from storage bin to storage bin to picks parts for an order. The motion control system that drives these units is reacting to live information it is receiving from a central computer - a case of Industry 4.0 in action.

Another way in which motion control is improving is in the precision of its operations. The resolution of positional accuracy has improved steadily over the years and is now at a point where, for instance, precision assembly of small parts is commonplace. With increasing accuracy we see even more innovative applications emerging along with a widening of the areas of use. So today, we see motion control systems being used for micro-machining, in operating theatres to perform surgeries with supreme accuracy, and to collect individual cells in biological laboratories.

These examples are very exciting, but it is notable that they are each based on the creative use of one or more relatively simple technological developments. Over time these developments will be applied to more and more projects.

As an illustration of a simple but important development, Kollmorgen's single cable connections for motion systems building makes the physical assembly of systems easier and faster. This takes out cost, improves maintainability and - importantly - encourages widening use of motion control. Similarly, PMD Corp is working on pre-engineered subsystems that can be easily integrated to make large sophisticated systems.

So over the next several years it looks like motion control will be moving into new fields and be more widely used, that industrial control in general will continue to develop becoming more and more capable, easier to use and more widely spread.

Learn more at www.inmoco.co.uk.

Inmoco

4 Brunel Close
Drayton Fields
Daventry
NN11 8RB
UNITED KINGDOM

+44 (0)1327 307600

info@inmoco.co.uk

www.inmoco.co.uk

More from Inmoco

Miniaturisation in motion control

Posted 4 days ago

New compact actuators deliver high force

Posted 1 month ago

Pumping technologies for precise fluid handling

Posted 2 months ago

High force integrated actuator reduces footprint

Posted 7 months ago

Rod-style electric actuators deliver 222kN thrust

Posted 8 months ago

Smooth motion arc segments, 360-deg rotary direct-drive motors

Posted 9 months ago

Agility Series direct-drive motors feature zero cogging

Posted 10 months ago

Voice coil motors offer precision motion in compact package

Posted 11 months ago

Inductive angle encoders are simple, robust and ultra-precise

Posted 1 year ago

Servo systems cables with improved connectors and labelling

Posted 1 year ago

Low-voltage DC servo motors for high-performance machines

Posted 1 year ago

Inmoco offers alternatives for motors no longer available

Posted 1 year ago

Simple Co-Engineering options for Kollmorgen AKM 2G servo motors

Posted 1 year ago

New stepper motor controller from Inmoco

Posted 2 years ago

Next-generation servomotors raise machine performance

Posted 2 years ago

Next-generation servo motors deliver 30 per cent more torque

Posted 2 years ago

Component compatibility can make or break a good system

Posted 3 years ago

High-performance actuator range is compact and rugged

Posted 3 years ago

Helicopter actuators may also transfer to other applications

Posted 3 years ago

Miniature encoders help advance surgical robot capabilities

Posted 3 years ago

Compact actuators improve aircraft motion systems

Posted 3 years ago

Encoders step up to help miniaturise electronics

Posted 3 years ago

Linear actuator design enables automated maintenance

Posted 4 years ago

Advanced motion cards provide precise actuation

Posted 4 years ago

Compact DA series actuators deliver quality and reliability

Posted 4 years ago

DA99 linear roller screw actuators increase reliability

Posted 4 years ago

DA Series high-performance electric actuators

Posted 4 years ago

New high-performance actuators available in UK

Posted 4 years ago

Servo motor with Ethernet interface connects directly with CNCs

Posted 4 years ago

Heavy duty linear actuator has high-performance controls

Posted 4 years ago

Single cable, multi-axis servo systems gets more power

Posted 5 years ago

Precision motion chips for dedicated controllers

Posted 5 years ago

Hygienic motor range has new feedback and connector options

Posted 5 years ago

Inmoco launches KOLLMORGEN safety feedback option

Posted 5 years ago

MC58113 Series programmable motion control chips

Posted 5 years ago

MicroE Veratus Series encoders: smart and reliable

Posted 5 years ago

Smaller, smarter encoders from Inmoco

Posted 5 years ago

Servo controller doubles power

Posted 5 years ago

Maintenance-free linear motors delivery high power density

Posted 5 years ago

PCB-based options are mighty minis for motor control

Posted 5 years ago

Vacuum-rated encoders from Inmoco

Posted 6 years ago

Minutes to motion - linear positioning explained

Posted 6 years ago

Servo users should not be seduced by power density alone

Posted 6 years ago

Inmoco introduces hygienic motor-gear combination

Posted 6 years ago

Servo technology is moving to a new paradigm

Posted 6 years ago

Compact washdown motor offers excellent performance

Posted 6 years ago

Maintenance-free lifting columns are easy to fit

Posted 6 years ago

Electric actuator optimises machine design and saves energy

Posted 6 years ago

Encoder offers value and performance plus flexible mounting

Posted 6 years ago

User-friendly compact encoder gets new side mount option

Posted 6 years ago

Reduce cabling with distributed servo drives from Inmoco

Posted 6 years ago

New functions make servo super-safe

Posted 7 years ago

Power storage modules act as servo UPS

Posted 7 years ago

Inmoco expands indexer family with motion features

Posted 7 years ago

Motion card integrates amps with full motion control

Posted 7 years ago

Wizard aids easy set-up of embedded motion controllers

Posted 7 years ago

EtherCAT master module for CTC 5300 Blue Fusion controller

Posted 7 years ago

OPC server gives instant access to automation controllers

Posted 7 years ago

Atlas single-axis motion amplifier is multi-talented

Posted 7 years ago

Rotary encoder establishes absolute position at start-up

Posted 7 years ago

Inmoco goes back to BASIC with new programmable servodrive

Posted 7 years ago

Mid-performance, high torque per pound servomotor

Posted 7 years ago

Stepper motors: advanced techniques

Posted 8 years ago

How to calculate point-to-point SCARA movements

Posted 8 years ago

Trombone servo drive range now has increased power

Posted 8 years ago

M4-X DC servomotor range is rugged and high performance

Posted 8 years ago

Achieve smaller, faster, smarter motion control

Posted 8 years ago

Expandable motion control system for extreme conditions

Posted 8 years ago

Elmo Gold Drum HV extends servo drive range to 65kW

Posted 8 years ago

B-Hornet military servo for high-power burst applications

Posted 8 years ago

O.P.S. Optical Encoders can be customised

Posted 8 years ago

ORMEC XD indexer family of servo drives expanded

Posted 8 years ago

Free automation systems control app for iPhone and iPad

Posted 8 years ago

Inmoco's Elmo Gold Servo Drives gain EtherCAT compliance

Posted 8 years ago

Inmoco introduces Elmo's DC Trombone digital servo drive

Posted 8 years ago

Robust linear actuators with integral force measurement

Posted 9 years ago

Energy-efficient IP67 stainless steel servo motors

Posted 11 years ago

Servo drives can be networked with IEEE 1394b

Posted 11 years ago

Wider choice of combined motion control and PLC units

Posted 11 years ago

Electronic cam controller suits labelling and capping machines

Posted 11 years ago

High-resolution encoder offers exceptional versatility

Posted 11 years ago

Elmo Duo controller integrates twin Whistle servo drives

Posted 11 years ago

Compact Guitar servo drive delivers 5kW of power

Posted 11 years ago

Ethernet/IP and Modbus options for multi-axis network manager

Posted 11 years ago

Elmo Solo Whistle saves servo application design time

Posted 12 years ago

New three-axis stepper modules for programmable controller

Posted 12 years ago

Electric linear actuators incorporate force measurement

Posted 12 years ago

Miniature ChipEncoder measures just 7x11mm

Posted 13 years ago

Cost-effective alternative for linear positioning and control

Posted 13 years ago

Rotary actuator includes servo motor, amp and position control

Posted 13 years ago

CANopen and absolute encoder options for digital servo drives

Posted 13 years ago

Programmable encoders feature miniature sensors

Posted 13 years ago

MicroE Systems' Mercury II digital encoder 'sets new benchmark'

Posted 13 years ago

Inmoco introduces ServoWire Motion and Logic Controller

Posted 13 years ago

Inmoco now offers Servotecnica slip rings

Posted 14 years ago

Inmoco launches "world's smallest" 50-nanometre encoder

Posted 14 years ago

High-resolution encoder is claimed to be the world's fastest

Posted 14 years ago

More technical articles
3 days ago
Boxing clever
A new chainflex cable box means big shipping cost savings for customers
3 days ago
New industrial vision online channel sees the light of day
Industrial vision provider IDS is making its expertise as a manufacturer of digital industrial cameras available free of charge and readily accessible on a new platform
3 days ago
Ball screws help protect buildings from earthquakes
Ball screws from NSK are helping to protect structures and people in earthquake zones
3 days ago
ATEX certification for new pneumatic valve island
Pneumatic process control offers numerous benefits, especially in hygienic applications. Bürkert says that its new Type 8652 AirLINE valve island provides users with improved safety features, communications and diagnostics
3 days ago
ABB launches condition-based maintenance service for robots
New service enables users to plan ahead and optimise production performance
3 days ago
What the UK-EU trade deal means for UK vehicle manufacturers
Now the UK has left the EU, the transition period has ended and the two parties have established a new trading relationship, UK-based vehicle manufacturers have some clarity over what they need to do to serve three key markets: Great Britain (England, Scotland and Wales), the EU and Northern Ireland
3 days ago
Farnell publishes Industry 4.0 ebook
New ‘Industry 4.0 Interviews’ ebook is available for free download from Farnell and showcases the opinions of leading global experts on the future of IIoT and Industry 4.0
3 days ago
Can DC motors be used at high temperatures?
There is no need for a heated discussion about it as maxon’s motor expert Andrew Gibson offers a view on the subject
4 days ago
Switching up a gear
Phoenix Contact is expanding its line of unmanaged switches
4 days ago
New Intertronics metering, mixing and dispensing system
Adhesives supplier Intertronics has introduced a new 2-K-DOS metering, mixing and dispensing system, said to be a compact, benchtop unit suitable for materials including silicones, polyurethanes and epoxies