Posted to Products on Monday, May 12, 2014 Share:

X20 system from B&R receives ATEX and HazLoc certification

Modules from B&R's X20 controller system are now certified for ATEX Zone 2 and HazLoc Division 2 environments. These modules can now be used in locations where explosive atmospheres may temporarily occur in the event of an error.

This certification is required, for example, in bottling plants for high-proof alcohol, spirits and cleaning agents. Heating and air conditioning equipment may also fall under the ATEX directive in the European Union or the ANSI/ISA 12.12.01-2007 standard in the USA. The same applies to a wide variety of other applications in the chemical and pharmaceutical industries.

For more information about the X20 controller system, visit www.br-automation.com.

B&R Industrial Automation Ltd

Broadoak, Southgate Park
Bakewell Road
Peterborough
PE2 6YS
UNITED KINGDOM

+44 (0)1733 371320

office.uk@br-automation.com

www.br-automation.com

More from B&R Industrial Automation Ltd

Light touch takes intuitive operation to a new level
Posted 2 weeks ago

B&R takes intuitive switch technology operation to new level
Posted 4 months ago

B&R introduces vertical-mount version of SuperTrak
Posted 8 months ago

ABB robots integrated within B&R's automation portfolio
Posted 11 months ago

Asset Performance Monitor gains multitenant capability
Posted 1 year ago

B&R launches powerful IP69K PC for mobile machinery
Posted 1 year ago

B&R's compact motor-mounted drives save machine building costs
Posted 1 year ago

Automation controllers feature OPC UA over TSN, Intel processors
Posted 1 year ago

ABB and B&R present first fully integrated robotics at SPS
Posted 1 year ago

New version of ACOPOStrak with IP69K protection
Posted 1 year ago

B&R presents smart manufacturing portfolio at PPMA Show
Posted 1 year ago

New all-in-one controller and multi-touch HMI from B&R
Posted 1 year ago

B&R launches ultra-thin Power Panels for swing arm HMIs
Posted 1 year ago

Servo drive controls dynamic processes with greater precision
Posted 1 year ago

B&R presents complete portfolio for batch-size-one manufacturing
Posted 1 year ago

Innovations Day 2019 to focus on Enabling the Adaptive Machine
Posted 1 year ago

Compact module provides six safety relays in a unit 25mm wide
Posted 1 year ago

MapleSim Connector streamlines model-based machine development
Posted 1 year ago

Vendor-agnostic, interface-free industrial communication
Posted 1 year ago

Wireless transmission of safety data using openSAFETY
Posted 2 years ago

Transmit HMI content and data over greater distances
Posted 2 years ago

Dynamic powerhouse added to B&R's servo motor lineup
Posted 2 years ago

True mass customisation: B&R unveil innovation at SPS IPC Drives
Posted 3 years ago

New muting modes from B&R make light curtains flexible
Posted 3 years ago

B&R presents new multi-touch terminals
Posted 3 years ago

ABB to acquire B&R
Posted 3 years ago

B&R's compact servo motors allow precise positioning
Posted 3 years ago

B&R presents advanced X90 control system at LIGNA
Posted 3 years ago

B&R presents IoT offering for legacy equipment at HMI
Posted 3 years ago

B&R and Hyundai Heavy Industries enter strategic partnership
Posted 3 years ago

Condition monitoring in the third dimension
Posted 3 years ago

Versatile panels with easy maintenance: Automation Panel 1000
Posted 3 years ago

Process control system facilitates sustainable alarm management
Posted 3 years ago

EUROMAP 79: Real-time communication for the plastics industry
Posted 4 years ago

B&R at EuroBLECH: optimised sheet metal processing
Posted 4 years ago

Performance data and diagnostics in B&R's HMI Service Center
Posted 4 years ago

Compact stepper motor drive with Safe Torque Off (STO)
Posted 4 years ago

Asset performance monitoring for pumps and heat exchangers
Posted 4 years ago

K 2016: B&R presents mapp technology for the plastics industry
Posted 4 years ago

WindEnergy: B&R presents new options for azimuth control
Posted 4 years ago

Five good reasons to choose integrated safety from B&R
Posted 4 years ago

B&R servo actuator with advanced safety functions
Posted 4 years ago

Operator terminal for automotive production from B&R
Posted 4 years ago

B&R compact servo motors with new multi-turn encoder
Posted 4 years ago

Mastering options in machine software with mapp CodeBox
Posted 4 years ago

Mobile automation: modular X90 control and I/O system from B&R
Posted 4 years ago

Manufacturer-independent safety technology from B&R
Posted 4 years ago

B&R presents advanced vibration compensation at drupa
Posted 4 years ago

CAD configurator for B&R servo motors and gearboxes
Posted 4 years ago

B&R presents an array of innovations at the 2016 Hannover Messe
Posted 4 years ago

New mapp components: Set up and control up to 15 axes
Posted 4 years ago

B&R at Smart IoT London
Posted 4 years ago

B&R presents a simple and secure option for remote maintenance
Posted 5 years ago

B&R launches PLCopen function blocks for conveyor belt tracking
Posted 5 years ago

B&R introduces X20 modules for strain gauges
Posted 5 years ago

Hygienic connections: B&R streamlines IP69K connectivity
Posted 5 years ago

Break free from hardwired safety in small applications
Posted 5 years ago

New safety functions for B&R's servo drive family
Posted 5 years ago

reACTION technology for ultrafast safety applications from B&R
Posted 5 years ago

APROL PDA for easy-to-use, centralised process data acquisition
Posted 5 years ago

Service robot scales negative slopes with B&R control system
Posted 6 years ago

Automation PC 2100: Controller and PC in one
Posted 6 years ago

B&R reduces development time with mapp technology
Posted 6 years ago

New UX vision processors rely on B&R's Automation PC 910
Posted 6 years ago

B&R presents the new ACOPOS P3 three-axis servo drive
Posted 6 years ago

X20 controllers and modules handle all environmental conditions
Posted 6 years ago

B&R announces the opening of its Northern Office
Posted 6 years ago

ACOPOSmotor sets new standards for decentralised motion control
Posted 6 years ago

New X20 I/O temperature and power measurement modules
Posted 6 years ago

Additional OPC UA functions in Automation Studio
Posted 6 years ago

X20 modules with increased component density
Posted 6 years ago

Servo drives detect and correct following error automatically
Posted 6 years ago

B&R's new Panel PC 2100 has Intel Atom technology
Posted 6 years ago

Full compatibility: new automation panels in 4:3 format
Posted 6 years ago

B&R Scalability+ reduces automation engineering time
Posted 6 years ago

B&R at the 2014 Drives and Controls exhibition in Birmingham
Posted 6 years ago

Automation Studio 4 integrated with Team Foundation Server
Posted 6 years ago

B&R at the 2014 Drives and Controls exhibition in Birmingham
Posted 6 years ago

New functions in SafeDESIGNER 3.1
Posted 6 years ago

Fast, fanless and flexible: Panel PC 900 with multi-touch
Posted 6 years ago

Data transmission distances up to 100m with Smart Display Link 3
Posted 6 years ago

B&R adds HART modules to the X20 I/O series
Posted 6 years ago

Ultrafast automation with reACTION technology
Posted 6 years ago

Compact X20 controllers with integrated I/O
Posted 6 years ago

B&R expands Power Panel HMI family
Posted 7 years ago

Increased efficiency in the plastics industry with APROL
Posted 7 years ago

B&R at the 2013 SPS IPC Drives trade fair in Nuremberg
Posted 7 years ago

Automation PC 910 from B&R with up to five slots
Posted 7 years ago

B&R illuminated keypad module with E-stop
Posted 7 years ago

APROL process control: high availability at all levels
Posted 7 years ago

High-power servo motors up to 140kW from B&R
Posted 7 years ago

CNC cylindrical grinder by Fermat Machine Tool, automated by B&R
Posted 7 years ago

B&R's process control system offers manipulation-proof logging
Posted 7 years ago

New additions to B&R's ACOPOSmicro lineup
Posted 7 years ago

Automation PC 910 from B&R with integrated UPS card
Posted 7 years ago

B&R boosts energy efficiency in plastics processing
Posted 7 years ago

SafeLOGIC-X machine safety system for cost-sensitive projects
Posted 7 years ago

Automation Studio 4 now available
Posted 7 years ago

Monitor all serial robot types in a safety application
Posted 7 years ago

TÜV confirms the safety of B&R I/O modules and controllers
Posted 7 years ago

Controller redundancy with POWERLINK
Posted 7 years ago

B&R servo drive with BiSS interface
Posted 7 years ago

Woojin revolutionises its machines with B&R
Posted 7 years ago

Close cooperation between Intel and B&R for industrial PC
Posted 7 years ago

Sales growth and a successful exhibition in Hanover for B&R
Posted 7 years ago

Temperature range for B&R X20 and X67 I/O modules increased
Posted 7 years ago

Efficient integration of B&R development tools
Posted 7 years ago

B&R launches new website
Posted 7 years ago

EWEA 2013: B&R to demonstrate integrated safety technology
Posted 7 years ago

Integrated evaluation of vibration patterns with X20 module
Posted 8 years ago

B&R technology in over 80 exhibitions at EuroBLECH in Hanover
Posted 8 years ago

New MA120 and MA170 control and I/O concept
Posted 8 years ago

B&R at the 2012 SPS IPC Drives in Nuremberg
Posted 8 years ago

Safe programming in Automation Studio: SafeDESIGNER Version 2.90
Posted 8 years ago

Integrated Safety Technology at HUSUM WindEnergy trade fair
Posted 8 years ago

Illuminated IP65 keypad module with fieldbus communications
Posted 8 years ago

Study proves popularity of B&R's Automation Studio software
Posted 8 years ago

B&R launches ACOPOSmulti65m IP65 motor-integrated servo drives
Posted 8 years ago

New interface between B&R Automation Studio and EPLAN
Posted 8 years ago

B&R launches software library for controlling winding processes
Posted 8 years ago

Automation Studio 4 improves programming efficiency
Posted 8 years ago

B&R and Baumüller establish long-term framework supply contract
Posted 8 years ago

Safety Roadshow a success on tour in over 20 German cities
Posted 8 years ago

Extended functionality with the APROL process control system
Posted 8 years ago

B&R presents the X20AP energy measurement module
Posted 8 years ago

B&R unveils multi-touch industrial control panels
Posted 8 years ago

SafeLOGIC openSAFETY controller for use on Profinet
Posted 8 years ago

B&R X20 System is certified for maritime applications
Posted 8 years ago

Open Day at B&R Industrial Automation's new UK premises
Posted 9 years ago

ACOPOSinverter P84 with integrated Ethernet Powerlink interface
Posted 9 years ago

Free conference explains benefits of Ethernet Powerlink
Posted 9 years ago

Access system diagnostic data remotely via a web browser
Posted 9 years ago

Design customised operator panels using free online tool
Posted 9 years ago

FPGA adds Powerlink to cost-sensitive industrial products
Posted 10 years ago

RFID operator identification is easy to integrate in machines
Posted 10 years ago

Market research shows Powerlink dominant for real-time control
Posted 10 years ago

Complete standard CNC package for machine tools
Posted 10 years ago

openSAFETY protocol now approved to IEC 61784-3-13
Posted 10 years ago

HMI features stainless steel housing and IP66/IP65 protection
Posted 10 years ago

ACOPOSmicro drive supports stepper and servo motors
Posted 10 years ago

B&R X67 decentralised I/O modules are sealed to IP67
Posted 11 years ago

Safety functions programmed within Automation Studio
Posted 11 years ago

Multi-axis controller incorporates multicore PC
Posted 11 years ago

Powerlink Safety remote I/O module is sealed to IP67
Posted 11 years ago

B&R opens second UK branch in Andover
Posted 11 years ago

Industrial Ethernet hubs for fibre optic communications
Posted 11 years ago

B&R launches Automation Studio Target for Simulink
Posted 11 years ago

APROL process control system gains innovative new functions
Posted 11 years ago

B&R and The Mathworks in the Connections Program
Posted 11 years ago

B&R launches ACOPOSinverter frequency inverters
Posted 11 years ago

New awards for users of Ethernet Powerlink
Posted 12 years ago

Bus controllers handle CAN and Ethernet Powerlink
Posted 12 years ago

ACOPOSmulti drive system receives UL certification
Posted 12 years ago

Power supplies designed for motion control applications
Posted 12 years ago

Machine safety products receive TÜV type approval
Posted 12 years ago

B&R Germany celebrates 25th anniversary
Posted 12 years ago

Alstom Power Control Systems to use B&R automation
Posted 12 years ago

Liquid-cooled motors save space, energy and maintenance
Posted 12 years ago

Industrial PC benefits from Windows XP embedded
Posted 12 years ago

B&R opens technical office in Berlin
Posted 13 years ago

CNC, robotics and multi-axis motion control in one platform
Posted 13 years ago

B&R opens Russian subsidiary
Posted 13 years ago

Drives incorporate Powerlink Safety and SafeLOGIC
Posted 13 years ago

B&R launches compact, dynamic, reliable servo motors
Posted 13 years ago

B&R opens new sales office in Los Angeles
Posted 13 years ago

B&R industrial PCs named best product at Slovakian show
Posted 13 years ago

B&R reports successful 2007 user group meeting
Posted 13 years ago

Panel PC systems offer power and versatility
Posted 13 years ago

Process control system with 64-bit processor technology
Posted 13 years ago

Multi-axis automation system is more economical
Posted 13 years ago

B&R takes on 1000th employee
Posted 13 years ago

Mobile control panels are lightweight and tough
Posted 13 years ago

B&R Automation Studio programs other vendor's drives
Posted 13 years ago

HMIs have the power of industrial PCs
Posted 13 years ago

Modbus/TCP controller is based on X20 Ethernet version
Posted 13 years ago

Ethernet Powerlink is compatible with Gigabit Ethernet
Posted 13 years ago

Automation catalogue contains over 1800 pages
Posted 13 years ago

B&R unveils Ethernet Powerlink Safety Technology
Posted 13 years ago

More products

2 days ago

Zero tolerance towards hose re-ending says BFPA

Nigel Thomason, British Fluid Power Association Distributor Chairman, condemned hose re-ending across industry as the UK’s fluid power trade association launched its ‘Choose Q for Quality’ campaign highlighting BFPA Approved Quality Members

2 days ago

New laser micrometer offers greater flexibility

Micro-Epsilon has extended its optoCONTROL 2520 series of optical laser micrometers with a new version offering double the measuring range of its existing version

2 days ago

Self-adhesive gaskets certified for hygiene applications

EMKA has introduced new self-adhesive gaskets that are approved to hygiene standard VDI 6022

3 days ago

Online igus trade show attracts thousands of engineers

Digital engineering support during a pandemic: thousands have visited the igus online trade exhibition

3 days ago

Robotics Innovation Award Nominees 2020

The finalists in the 16th Award for Innovation and Entrepreneurship in Robotics & Automation (IERA) showcases the latest skills robots have acquired to assist humans at work

3 days ago

Guide to choosing the right cable clamp

The integration of electrical and electronic systems into machines and panels always involves addressing wiring, and considering things like strain relief, accessibility, routing, and security. Essentra Components has published a new guide which might prove helpful in these cases

4 days ago

Discover maxon’s new online trade fair

MachineBuilding.net readers can visit the virtual maxon booth to discover the company’s latest products. In addition to the newly announced MiniMACS6 master controller, visitors will find high torque BLDC motors as well as flat motors for robotics and an update on the Mars rover

4 days ago

New prism optic reflector offers 8m range

With the introduction of its Sceptre high-performance prism optic reflector, SICK has extended the range of its deTem 4 A/P multiple light beam system to eight metres

5 days ago

New Always-On vibration and temperature condition monitoring kit

The new FLIR SV87-KIT is said to offer machine builders a low cost, easy-to-configure 24/7 remote vibration and temperature sensing solution

5 days ago

New brochure on standard components for packaging machines

Elesa has published a new brochure dedicated to the packaging industry. It features the company’s full range of standard components for machine designers involved in the wider packaging industry, including bottling and labelling in the food and pharmaceutical sectors