Machine Building

Connector cuts assembly time for aluminium profile frameworks

Machine builders can now save up to 70 per cent on framework assembly time thanks to the introduction of an all-new profile connector system from Fath Components. The news is likely to be welcomed by all framework users because, according to Fath UK Managing Director David Hayes: "The new connector design is set to transform assembly times from here on." Called Alu Connection Angles M, Fath's new connectors have been shown to help users achieve substantial time savings in the assembly of most typical machine frameworks. This time saving is attributable to a combination of clever design and the innovative use of magnet technology in the (patent-pending) connector block.

3rd March 2020

igus increases drylin delta robot working space by factor of 10

igus is introducing a new version of its drylin delta robot with a 10× larger work space volume compared with its original model. This lightweight DLE-DR system for simple pick & place tasks is delivered as a kit or ready to install product. This guarantees quick operation and saves costs immediately.

3rd March 2020

Nilab Green Drive - low-cost, powerful industrial pusher/puller

Now available from Servo Components & Systems Ltd, the Nilab Green Drive electric linear motor range is designed specifi;cally for use as an actuator. Combining the speed and rugged operation of pneumatics, the controllability of a ball screw and the inherent reliability of direct-drive linear motors, the Nilab Green Drive actuator is a low-cost, powerful industrial pusher/puller.

3rd March 2020

Ultra-powerful cooling for 3.5-inch single-board computers

congatec is introducing three new premium embedded cooling products for its 3.5-inch Single Board Computers (SBCs). Based on the PICMG specifications for standardised COM Express heatspreaders and thanks to their extra-large footprint, they offer a maximum cooling mass and surface area for very powerful 3.5-inch SBC designs. Heat dissipation is standardized and all products feature a large heatspreader, made of light metal, which disperses waste heat from the CPU hotspots quickly and effectively. Depending on the TDP, the heatspreader can be expanded with passive finned heat sinks or active ventilation systems.

2nd March 2020

Standard and custom coils for compliance with ATEX

ATAM is promoting its range of products suitable for use in hazardous areas where compliance with the requirements of the ATEX Directive is necessary.

2nd March 2020

New M16 X-coded connectors handle up to 10Gbits/s

Binder is launching an M16 X-coded connector capable of handling the data speeds demanded by today's sensor-based automated production facilities. Data transmission figures are an impressive 10Gbits/s.

2nd March 2020

Phoenix Contact launches PSRmodular configurable safety system

The comprehensive PSRmodular configurable safety system portfolio consists of various function modules starting from an overall width of just 22.5mm. They are equipped with screw or Push-in connection and can be used for applications up to PL e and SIL3. Using a TBUS DIN rail connector, the safety modules can be arranged next to each other without configuration. This allows the system to be flexibly adapted to the customer's specific requirements.

2nd March 2020

Schaffner extends family of ecosine evo passive harmonic filters

Schaffner is extending its ecosine evo line passive harmonic filter series. The product continues to evolve, combining superior technology to reliably mitigate excessive harmonics with an innovative modular concept, to meet customer requirements.

2nd March 2020

Choice of drylin SHT options for use in extreme environments

igus offers a broad choice of options for its drylin SHT stainless steel leadscrew module, and the company has just produced a short video to show these. Made of 304 grade stainless steel, also known as V2A, the drylin SHT-SS is suitable for use in the food and beverage industry, as well as high temperature applications.

28th February 2020

congatec expands embedded vision portfolio

congatec is expanding its embedded vision offering with a new platform for the NXP i.MX 8 processor series. The application-ready ARM platform now for the first time integrates all components required for MIPI camera support on the board, allowing plug & play connection of camera technology from embedded vision partners such as Basler. As the 3.5 inch based platform is modular and based on the SMARC standard, OEMs can quickly and cost-efficiently customise performance and implement their system solutions based on a comprehensive ecosystem of off-the-shelf components.

28th February 2020