Machine Building

Products

congatec 100W ecosystem for embedded edge and micro servers

congatec is launching its new 100W ecosystem for embedded edge and micro servers at CIIF 2019 Shanghai (Hall 6.1H, Booth A112). The ecosystem is designed for embedded edge and micro servers that increasingly utilize 65-100 Watt COM Express Type 7 Server-on-Module performance for most cost-efficient scalability. It initially targets the recently launched conga-B7E3 modules featuring 3GHz dual-die processors of the AMD EPYC Embedded 3000 series that supports a maximum TDP of 100 Watt, up to 16 cores and 32 threads.

17th September 2019

Schaeffler launches new range of electric motors

Schaeffler is entering the electric motor manufacturing sector with a modular, highly integrated technology platform. This family of electric motors is designed for efficiency and a good price/performance ratio, and potential applications range from hybrid modules and dedicated hybrid transmissions (DHTs) through to electric motors for electric axle drives. Voltage ranges from 48V to 800V and performance classes from 15kW to over 300kW are possible. Volume production for a range of customer projects worldwide is set to begin in 2021. Schaeffler's worldwide network of manufacturing plants and special machinery and tool manufacturing facilities will be used to set up and operate the production lines. Schaeffler will be publicly presenting the electric motors - which were developed in-house and are ready for volume production - as complete systems for the first time at the IAA.

16th September 2019

Terminal blocks cope with high-temperature applications

Finding the right terminal blocks for specialist applications operating at high temperatures can present a challenge for designers, especially those designing the latest models of consumer and commercial/industrial ovens, including the large range cookers that have become so popular in recent years. A specialist range of products developed specifically for commercial and domestic appliances that operate at high heat is now available at Hylec-APL.

16th September 2019

Video shows how twisterband guides cables for multiple turns

The igus twisterband range has further extended its reach by providing compact horizontal rotations of up to 7000 degrees, which is nearly 20 full-turns, and vertical rotations of 3000 degrees. At speeds of up to 180deg/sec, that is 30 full-turns in a minute. Made from lightweight, yet tough, advanced engineering polymers, twisterband HD features a strong pinned connection between each of its links for a longer service life.

16th September 2019

Schaeffler launches XTRONIC Control Unit for autonomous vehicles

Remote monitoring and control are particularly important for autonomous vehicles. However, to date such functions have only been available in isolated systems or have been dependent on specific platforms. The XTRONIC Control Unit, on the other hand, combines safety, monitoring, operating, and comfort functions in a single system. The innovative system also makes a convincing case due to its wide range of interlinked, integrated components - from entertainment systems through to condition monitoring for vehicle components. The reliable interlinking of innovative driver assistance systems together with radar, lidar, ultrasound, and even artificial intelligence, therefore provides the technological basis for autonomous driving.

16th September 2019

Aerotech simplifies control of positioning systems

Aerotech presented its innovative laser and motion control products at the LASER - World of PHOTONICS trade fair in Munich (24-27 June 2019). The highlight at the trade fair was the introduction of the new Automation1 controller as successor to the A3200.

16th September 2019

Ultrasonic sensors with IO-Link have 8m measurement range

ifm electronic says it recognises the onward march of IO-Link technology and the important benefits it brings in helping to meet the growing demands for increasingly sophisticated control and automation applications. A good example of this is their innovative range of M30 ultrasonic position sensors, designed specifically for applications where continuous level measurement and object detection for bulk materials or liquids applications are required.

13th September 2019

Ixthus to supply Riftek contactless tube ID measurement system

Developed for an Italian automation specialist and available as part of Riftek's expanding range of laser scanning pipe and tube inner diameter measurement systems, a new variant of the RF096 series laser probes speeds precision measurement inspection for tubular components. With direct interfacing to PROFINET equipped fieldbus controllers, the system combines a rotating triangulation laser and a motorised linear translation stage that together step & scan profiled or smooth inner diameters between 35 to 55mm for a measurement resolution of 3 microns and linearity of +/-15 microns over a bore depth range of 100mm. As Riftek's exclusive UK & Ireland distribution partner, Ixthus Instrumentation provide complete sales and support for the RF096 series.

13th September 2019

New material optimises insulation for igus chainflex cables

The trend for variable frequency drives (VFDs) is moving towards more compact drives with the same or a higher performance level than their predecessors. The more compact design of the motors can result in higher temperatures within the system, compared with larger ranges of the same motors. The result is that the cable heats up via the connector contacts.

13th September 2019

Easy automation of sanding tasks with cobots

Sanding applications for collaborative robots normally require many inter-communicating hardware and software components. Integration is complex and time-consuming but, thanks to RARUK Automation, there is now a quick and easy way to do it. New to its Robotiq range is an all-in-one sanding system designed specifically to work with Universal Robots.

13th September 2019