Machine Building

New ball screws with interchangeable nut-shaft combinations

At EMO 2019, NSK will present a new series of ball screws in which the nut and shaft can be freely combined. This design makes it easier for both dealers and end users to stock or purchase high-quality ball screws in small quantities.

6th September 2019

Phoenix Contact launches new gateways for Modbus-to-Ethernet/IP

The device family of serial device servers and gateways from Phoenix Contact enables a variety of protocols to be seamlessly integrated into a network or the simple migration of existing serial devices into the modern Ethernet.

5th September 2019

RS Components now shipping ultra-compact industrial slide

RS Components is now supplying a highly integrated slide for industrial automation applications that is claimed to be the most compact available on the market today. Manufactured by Festo, the new DGST mini slide integrates a slide and yoke plate into a single component, ensuring very high rigidity and outstanding precision and angular alignment. The slide also has integrated room for proximity sensors, so there are no projecting parts. This level of compactness enables the device to be highly space saving in a range of industrial machinery and processes.

5th September 2019

New sub-GHz radio module for ultra-low-power WPAN designs

Mouser Electronics is now stocking the SAM R30 sub-GHz module from Microchip Technology. The industry's smallest IEEE 802.15.4-compliant module, the SAM R30 combines an ultra-low-power microcontroller with a sub-GHZ radio in a 12.7 × 11mm package, enabling long-lasting battery life in space-constrained designs like wireless-networked sensors and controls in industrial, home automation and smart city applications.

4th September 2019

Bürkert launches compact Type 6164 cartridge valve

Bürkert has been opening up optimisation opportunities for device makers with the introduction of its 11mm long Type 6164 cartridge valve. This compact option for pneumatic applications can offer up to a 40 per cent space saving compared with traditional valves, thanks to its ability to fit directly into custom manifolds, eliminating external packaging. Its combination of strong performance within a compact footprint is well suited for medical device manufacturers producing therapy machines.

4th September 2019

New welding wire reduces spatter when welding galvanised steel

ESAB Welding & Cutting Products is launching OK AristoRod 38 Zn, a solid wire with a specially alloyed formula that minimises porosity and spatter on galvanised steels. As a result, it significantly reduces or eliminates rejects and rework, delivering optimised results when welding the galvanised steel components used in transportation, white goods, agricultural tanks and troughs, HVAC systems and construction (roofs, facades, gates, fences, stairs, catwalks).

3rd September 2019

MagneMover LITE cart system makes short runs more efficient

Manufacturers are customising products to meet more targeted consumer demands. As a result, they must contend with shorter production runs and more frequent changeovers, which takes time away from producing products. The MagneMover LITE system is helping make these higher-SKU operations efficient by moving payloads faster in a more flexible way than traditional conveyors do today.

3rd September 2019

24V 20A DC DIN-rail power supply with remote control of output

PULS Power is introducing a new DIN-Rail power supply CP20.241-V1 featuring a remote-controlled ON/OFF feature. This allows system administrators and building automation controllers to switch the power supply on or off by use of an external signal switch or transistor gate. This remote-control feature makes centralised control of multiple system components very simple to implement and provides a very efficient shut-down facility in the event of system failure or emergency.

2nd September 2019

Active vibration control system for CNC machine tools

NUM is launching an innovative accelerometer-based active vibration control system for CNC machine tools. Primarily designed to improve machining by virtually eliminating tool head vibration, the system further helps increase productivity by maximising material removal rate (MRR) and can also provide valuable real-time feedback for predictive maintenance purposes.

2nd September 2019

Pinet aluminium hinges from FDB Panel Fittings

FDB's new FinAlu lightweight range of Pinet hinges provide light and tough service in applications such as medical equipment, electronic enclosures, food equipment, vehicle cabinets and other high-performing situations.

2nd September 2019