Machine Building

Circular connectors provide cross-manufacturer compatibility

Phoenix Contact is launching a new series of circular connectors with a standard system and a fast locking system onto the market. The M17 to M40 PRO series offers uniform options for signal and power transmission. The Oneclick fast locking system enables users to connect their devices quickly and safely.

18th December 2018

IO-Link products and software from Phoenix Contact

IO-Link, the transmission protocol with an open standard for automation, is currently the fastest growing communication standard in the field of industrial automation. To this end, Phoenix Contact offers a comprehensive IP20 and IP67 portfolio of IO-Link masters, devices, cabling, and software.

17th December 2018

Form fit and function replacements for obsolete power supplies

Powerstax can offer users of legacy equipment and those involved with repair or refurbishment of critical or capital systems form-fit-and-function replacement power supplies incorporating the latest technology and providing major increases in reliability and efficiency.

13th December 2018

"˜Human assistance' camera improves manual assembly

The Ricoh SC-10 camera inspection system is designed to both provide assembly instructions to operators and verify each step has been completed correctly. The simple, self-contained camera system is having a major impact in many different manufacturing environments in Japan is now available in Europe exclusively from Stemmer Imaging.

13th December 2018

Congatec doubles RAM support for server-on-modules

Congatec reports that its Intel Atom C3000 processor-based conga-B7AC server-on-modules now support up to 96GB DDR4 SO-DIMM memory on three sockets. This is twice the previously supported capacity and sets a major new milestone for COM Express Type 7-based designs, as memory is one of the most important performance levers for embedded edge server technologies. This performance leap was possible because the Intel Atom C3000 family supports the newly available 32 GB SO-DIMMs. The new Server-on-Modules with a high-speed memory bandwidth of 2400 MT/s are available now and can be ordered with and without ECC support.

13th December 2018

Compact, powerful and cost-effective DIN-rail power supply

PULS is launching the PIC480.241C single phase input 24V, 20A output power supply. An extension of the PIANO-Series, this cost-oriented power supply is just 49mm wide, freeing up rail space for functional system modules.

12th December 2018

New ceiling-mounted SCARA robot for fast assembly

ABB is expanding its SCARA robot family with the launch of a compact invert-mounted model for small parts assembly applications. By mounting the IRB 910INV on the ceiling, manufacturers can increase the space efficiency and flexibility of each cell and handle more complex tasks even in cramped locations. The inverted mounting also allows the IRB 910INV to collaborate with other robots and machines simultaneously in the same footprint, further boosting productivity.

12th December 2018

3D vision system creates data twice as fast

The Ensenso XR stereo camera from IDS can calculate 3D point clouds itself. Afterwards, it transmits the data via Gigabit Ethernet or WiFi to a host PC for further analysis. The advantages of the new camera series include, for example, significantly faster 3D data generation and reduced load on bandwidth and connected PCs.

11th December 2018

Microsemi PolarFire FPGAs for IIoT applications now at Mouser

Mouser Electronics is now stocking PolarFire field-programmable gate arrays (FPGAs) from Microsemi. The flash-based, mid-range PolarFire FPGAs deliver 300K logic elements at up to 50 per cent lower power consumption than equivalent SRAM-based FPGAs. The devices offer best-in-class security, single event upset (SEU)-immune fabric, and serialiser/deserialiser (SerDes) performance for a variety of applications in the communications, defence, aviation, industrial automation, and Internet of Things (IoT) markets.

11th December 2018

Rugged RTC-700RK Android tablet computer

Now available from RDS is the new Rugged RTC 7inch WXGA TFT LCD tablet. This ARM-based Android tablet has a Rockchip RK3288 1.6GHz quad-core processor and 2GB SDRAM DDR3L as well as complying with MIL-STD 810G specifications. The panel is a PCAP multi-touch device with Gorilla Glass and it also has extended swappable batteries.

11th December 2018