Machine Building

Same-size PCB terminal blocks, differing connection technology

Phoenix Contact's identically shaped TDPT PCB terminal blocks are the option for market-specific devices in a uniform design. Thanks to their identical size, device manufacturers are free to choose either the screw or the Push-in spring connection, without having to adapt the PCB or device design.

21st May 2018

A rugged, IP69K waterproof & dustproof panel PC

RDS is announcing the availability of the TechNexion TWP-1010-iMX6 10.1-inch, capacitive touch panel PC. Specially designed with robust features for operation within harsh production environments such as food manufacturing, this panel PC runs on Linux, has NXP iMX6 processors with single/dual/quad core options based on the ARM Cortex-A9 architecture.

18th May 2018

Vision sensors rated IP69K for food & pharma applications

Baumer's Verisens vision sensor range now includes models in stainless steel housings which are IP69K rated to enable wash down and therefore meet the specific requirements of applications within the food and pharmaceutical industries. Whilst complex and sophisticated image processing systems, the XF Series is designed to enable simple set-up and intuitive operation, even for the non-expert.

17th May 2018

N5 tilt sensor with 360 degree measurement from elobau

The N5 tilt sensor is the latest in a range of tilt sensors from elobau. The N5 with CAN-Bus interface complements the single axis N3 and the dual axis N4. Unlike the N3 and N4 which have a horizontal/vertical measuring range, the N5 has an increased measuring range of up to 360 degrees on a single axis or 180 degrees on a dual axis.

17th May 2018

ICS series modular electronics housings

The new modular electronics housings from Phoenix Contact now extend the product range for device manufacturers. The ICS (Industrial Case System) electronics housings are available in graduated sizes, and with standardised device connections such as RJ45, USB, D-SUB and antenna sockets. The housing series provides the basis for Industrie 4.0, power electronics, and process automation applications, such as communication systems, interfaces and gateways, relay assemblies, and safety technology.

17th May 2018

Sick ReLy safety relays offer faster response and longer life

When it comes to safety relays, small performance improvements can result in big productivity gains. That is why Sick is launching its ReLy safety relays that achieve a 10ms response time and provide a class-leading, long and durable product lifecycle.

16th May 2018

New flowmeters to look out for in 2018

Flowmeter technology has made some significant steps in the past few years. While the traditional mechanical systems have remained relatively unchanged, the development of ultrasonic, sonar and magnetic systems has progressed significantly.

16th May 2018

EMKA 1095 program: bow/bridge, tubular and chest handles

EMKA is promoting their 1095 program of handles, which are easy to use and easy to install. Known variously as bow handles, bridge handles or simply as pull handles, the versions from EMKA, in comfortable round or oval grip styles, are readily fixed from front or rear depending on type, with sizes suitable for single hand use from 120mm up to 500mm in length.

16th May 2018

New DIRAK lift-off hinge concept from FDB Panel Fittings

The team at FDB Panel Fittings have found that hinge products for construction of electrical and 19" industrial cabinets require a high degree of design flexibility in combination with stability and security during operation. It was from this close relationship with the specialist panel industry that the new "pop and click" lift-off door hinge was developed. Not only is fitting and removal toolless and remarkably quick, providing easy door removal, but it also retains the hinge pin - so no more having to keep track of fiddly pins.

15th May 2018

GigE Vision camera firmware 1.5 with new trigger modes

Users of GigE Vision camera models and the IDS Vision Suite will benefit from an extended range of functions. New cameras are sold directly with the updated firmware. Those who already use GigE Vision industrial cameras from IDS can easily update them and then use helpful new functions such as extended trigger modes, programmable counters and timers as well as the IDS-specific pulse width modulation feature.

15th May 2018