Machine Building

Würth Elektronik introduces new flat-ribbon cables

Small and flexible flat-ribbon cables are widely used by machine builders in LCD screens, as well as board-to-board connections for medical equipment, test and measurement devices and a whole range of industrial applications. In many of these, it is not important to have a vibration-free interlock for the plug-in connector, and for such applications, Würth Elektronik has now introduced what it refers to as a less expensive and easier-to-assemble solution to an LIF connector.

24th June 2020

New environmentally sealed pressure switch

Manufactured by World Magnetics Company and available in the UK and Europe from Variohm EuroSensor, the new DesignFlex PSF111 series environmentally sealed pressure/vacuum switch is designed for challenging switching tasks where dust and water ingress prevention is required. The waterproof snap-action switch suits pressure and vacuum configurations with switching ranges from -822 to + 4137mbar (-11.9 to +60psi) and is available in a choice of port configurations and mounting options.

24th June 2020

Wireless position switches, sensors for explosive environments

"Wireless Ex" is a technology developed in Germany by a company called Extreme, part of the steute group, which is said to simplify the assembly and operation of sensors and switchgear in explosive environments. With the advent of new technology, switching devices are no longer connected to the receivers in a control cabinet via Ex-compatible cables, but instead use a low-energy wireless protocol created especially for such applications. As such, it is certified to ATEX and IECEx standards.

23rd June 2020

Reliance slit couplings from Ruland

Ruland and Reliance Precision have agreed to co-operate by offering Reliance designed and manufactured slit couplings through Ruland's eCommerce platform and worldwide distribution network. Ruland will stock (and bore to size) a wide selection of slit couplings at its Marlborough, MA location. The addition of slit couplings gives Ruland a more complete zero-backlash coupling portfolio, to complement its existing product range which includes rigid, beam, bellows, controlflex, disc, jaw, and oldham couplings.

22nd June 2020

New Panasonic placement machine

Panasonic Factory Solutions, a division of Panasonic Industry Europe, has introduced a new dual-gantry, multi-head, odd-form placement and insertion machine. Known as the NPM-VF, it is the latest development in a line of previous SMT oddform placement machines and is stated "To provide new levels of flexibility within the production environment".

22nd June 2020

SKF extends range of JIS-compliant ball bearing units

With the introduction of its new UC 300 series of ball bearing units, SKF says it has increased protection against contamination in heavy-duty applications. According to the company its new UC 300 ball bearing units feature "Superior sealing, stronger locking and interchangeability with all JIS (Japanese Industrial Standards) housings".

19th June 2020

New Synflex Optimum thermoplastic hydraulic hoses

Eaton Hydraulics is launching its Synflex Optimum family of thermoplastic hydraulic hoses and fittings, designed to work together to "Improve hydraulic system performance, simplify assembly and optimise inventory". The company states that the new range offers high abrasion resistance and a wide range of operating pressures for demanding applications including aerial lifts, agricultural and construction machinery, forestry equipment, car trailers, lift trucks, marine applications, chemical plants and car wash systems.

19th June 2020

New headers for currents up to 41A

Phoenix Contact says that its new horizontal and vertical headers with 7.62 mm pitch are specifically tailored to the requirements of power electronics, and that they are compatible with the LPC 6 and PC 6/.. ST-BUS series. Device manufacturers can therefore combine a header type with various connectors and implement devices with different connection technologies.

18th June 2020

Reel advantage unveiled by igus

igus is introducing the e-spool flex, designed to increase safety at manned workstations. It moves a single cable or hose and stows it away quickly whilst retaining an end-to-end connection. The company says that the spiral guide allows for quick installation of a cable into the reel and then the e-spool flex is ready for use.

17th June 2020

DST20 Miniature Strain Sensor from Baumer

For applications where space is limited or machinery has small structural dimensions, Baumer is introducing its new DST20 Miniature Strain Sensor. The company says it is designed to provide static and dynamic measurements of large forces across a range of +/-500 to 1000 µm/m, even where space is at a premium.

17th June 2020